clamp

clamp provides mechanical and internal electronic connection between coperate and cdisplay. It has been designed for optimum comfort and ease of operation when using the coperate and the cdisplay together.

ctruss

ctruss is the carry strap fastening tool for the coperate unit. It is attached to the back of the coperate and provides a secure attachment for cstrap.

cstrap

cstrap is the cmotion universal carry strap. Even when the coperate is not being used, it can be kept close at hand. cstrap is securely connected to the ctruss using a innovative quick opening device.

cfastener

The cfastener is a universal clamp that can be secured to various rods or bars 15-28mm. (E.g. a support rod or the pan-bar). The clamp offers two 1/4 inch screw fittings to allow attachment of numerous fixtures.

cfast-czoom

Attachment set used for attaching the czoom to the pan-bar, or directly to the camera. The rosette matches those used with Arri cameras, and being two-sided, it allows for greater flexibility for your required set up.

cfast-cdisplay

Attachment set that connects the cdisplay to the camera. The multifunctional arm allows for optimal positioning of the cdisplay.

cfast-artemis

Attachment tool that secures the camin to the Sachtler-Artemis Steadycam
system.

Battery Charger

Battery charger for cmotion batteries

Battery

Battery, 2.400mAh, 7.2V for all cmotion hand-units, (readily  available in various stores, but the cmotion batteries have a higher capacity (2.400 mAh) than those found in shops. Operating time of the coperate with the cmotion battery is approximately 11hrs

Socket adapter

Worldwide socket adapter set

cfast-camin

Attachment set which secures the camin to the camera or any 1/4” or 3/8” screw attachment hole. A 6 sided piece is secured to the body of the camin and slips easily yet securely into the cfast-camin receiver. An integrated quick-lock allows for quick and easy mounting and dismounting of the camin.

Calibration Package implement

Calibration Package implement The calibration package includes all necessary tools for lens calibration through a PC. The set includes: software, webcam, fastening tool for the webcam, 2 rods, power supply, lens mount.

Note: DOES NOT INCLUDE: Laptop, lens, camin or lens-motor

Calibration Software


The cmotion calibration software is a PC program that allows the user to implement new lenses into the system. cmotion also offers calibration software which is administered directly through the cdisplay. This is called cdiscal.

Hedén motors

cmotion sets are usually supplied with Hedén Motors. Their main advantage is that their gear rings can be easily exchanged according to teeth size. They can also be
placed on either side of the motor. Hedén motors are delivered with 4 different gears
(0,4; 0,5; 0,6 and 0,8).

ctag

ctag is the cmotion lens memory chip. All lens data is “written” onto the ctag, which then accompanies its respective lens. Anytime the user needs to upload lens information, he/ she can “read” the data onto the cdisplay. Within seconds the lens data is available and displayed on the cdisplay's 3.8” TFT screen. We are happy to implement other accessory equipment upon customer request. If you need any special functions – just ask us!